Techcon TSD1102-24 Polypropylene Locking Sleeve

Description

Techcon locking sleeve is a polypropylene replacement sleeve for receiver-head service on Techcon syringe barrel dispensing hardware. Part TSD1102-24 is a receiver-head locking sleeve made from polypropylene.

Techcon locking sleeve Benefits

• Polypropylene construction suits a lightweight replacement part in syringe barrel hardware.
• Part-specific Techcon number supports cleaner purchasing and spare-parts control.
• Receiver-head fit helps maintenance teams avoid using a mismatched generic sleeve.
• Small component size makes it practical to keep several pieces with dispensing spares.
• Direct replacement status helps buyers match the part to the existing Techcon setup.

Use this item when a dispensing station needs a known Techcon replacement part or manual control component. Confirm the matching valve, syringe barrel, receiver head, or fluid path before installation, then inspect nearby seals, fittings, and tips so the full assembly is ready for service.

Techcon locking sleeve Applications

• Receiver-head service on Techcon syringe barrel dispensing equipment.
• Replacement of a damaged or missing locking sleeve during bench maintenance.
• Spare-parts kits for adhesive, sealant, grease, and fluid dispensing stations.
• Line recovery when a small plastic component prevents normal syringe use.
• Procurement cleanup where exact Techcon part numbers are required.

Setup And Service Notes

Before installing the sleeve, clean the receiver head area and check that the mating part is not cracked, swollen, or packed with cured material. Seat the sleeve by hand and avoid forcing plastic parts over damaged hardware. If the receiver head does not hold the barrel or related component correctly after replacement, inspect the full head assembly rather than stacking extra force onto the new sleeve.

Keep the part number on the maintenance list and store spares in clean packaging. Dispensing components are often small, but a worn sleeve, valve, or gun can stop a line just as quickly as a larger failed assembly. Replace damaged parts before loading production material, and run a controlled test shot or bead after service.

Technical Details And Documentation

Techcon lists TSD1102-24 as a locking sleeve for receiver head use and specifies polypropylene construction. Review current manufacturer information from Techcon before changing a dispensing process or maintenance procedure.

Dispensing And Ordering Help

For related guns, valves, cartridges, hoses, and nozzles, browse Chemical Concepts dispensers, mixers, and nozzles. For help matching parts to a Techcon setup, call (800) 220-1966 or email [email protected].