LORD Accelerator 25GB for Structural Acrylic Adhesives (Metal Pail)

Description

The LORD Accelerator 25GB is the cure component for LORD 850 and 852 toughened structural acrylic adhesives, and it carries glass beads that set a consistent bondline thickness. This stainless pail holds the accelerator in bulk for shops bonding metals and engineered plastics at room temperature. Because it works as a no-mix pair with the adhesive, crews skip the metering and static-mixing steps that slower two-part systems require.

Where the LORD Accelerator 25GB fits

Applied to one substrate while the adhesive goes on the other, it starts the cure when the two faces meet, so no separate mixing step is needed. The glass beads hold the parts apart at a fixed gap, which keeps the bondline even across large panels and long seams. It pairs with the 850 and 852 adhesives across their range of working times. On long weld-replacement seams, the fixed gap keeps every section of the joint at the same thickness from end to end.

How the LORD Accelerator 25GB performs

Room-temperature cure means assemblies come together without ovens or heated fixtures. The glass-bead content gives repeatable gap control, which matters on structural joints where an even bondline drives consistent strength. Handled with the matched adhesive, it keeps the 850 and 852 systems ready for high-impact, high-peel bonding.

Specifications

• Role: accelerator for LORD 850 and 852 acrylic adhesives
• Feature: glass beads for fixed bondline thickness
• Cure: room temperature, no-mix application
• Packaging: stainless steel pail

Order the pail to keep the accelerator matched to your 850 or 852 supply, and confirm the ratio your process calls for before the run. Browse our primers and accelerators for related cure components. The accelerator is part of the Parker LORD structural acrylic system.

Need Help?

Need help spec’ing accelerator ratio for your acrylic bond? Call (800) 220-1966 or email [email protected].