Pyles Aluminum Material Outlet Block

Description

The Pyles aluminum material outlet block is the machined component that routes metered material out of a meter-mix dispensing valve toward the static mixer. As one of the core dispensing valve parts on a Pyles two-part system, the outlet block carries resin or hardener from the valve body to the mix outlet under pressure, holding tight tolerances so the shot stays consistent from cycle to cycle.

Where these dispensing valve parts are used

Two-component meter-mix equipment in aerospace, electronics, and general manufacturing depends on the outlet block to keep the material path sealed and dimensionally stable. The block bolts to the valve assembly and presents a clean port for the mixing nozzle, so metered A and B streams reach the 2 part mixing nozzle at the correct ratio. Maintenance crews keep spare outlet blocks on the shelf because a worn or damaged port changes shot volume and can starve the mixing nozzle. Standardizing on the correct block keeps a production dispensing cell repeatable across shifts.

How these dispensing valve parts perform in service

Machined from aluminum, the block resists the abrasion of filled adhesives and the swelling that softer materials show when exposed to solvents and uncured resin. Aluminum also keeps the part light and dimensionally steady through temperature swings on the line. The sealing faces stay flat so the joint to the valve body does not weep between service intervals. For matching the block to your valve and mixer, browse our dispensing mixers and nozzles category, or contact the manufacturer line at Techcon for Pyles system fit details.

Specifications

Order the aluminum outlet block when you service a Pyles meter-mix valve or stock spares for a production dispensing cell. A flat, in-spec block keeps shot volume steady and feeds the mixing nozzle cleanly through long runs.

Need Help?

Need help identifying the right outlet block for your Pyles dispensing valve? Call (800) 220-1966 or email [email protected].