Description
A pneumatic cartridge dispenser like the Medmix MK T1 applies shop air to push a 310 mL cartridge at a controlled rate, taking the manual squeeze out of repetitive bead and seam work. Built for single-component sealants and adhesives, the T1 uses a pneumatic cylinder in place of a ratchet trigger, so the operator sets output with a thumb control instead of repeated hand strokes.
pneumatic cartridge dispenser fit and output
The MK T1 is sized for a standard 310 mL caulking cartridge and is rated for an 8 bar (116 psi) maximum air supply, delivering up to 1.3 kN of thrust at the piston. That force range suits low to medium viscosity sealants, adhesives, and sanitary caulks where a manual gun would tire the operator over a full shift or a production run. The frame measures roughly 249 mm (about 9.8 in) and the unit weighs under a pound, light enough for sustained one-handed work along a seam or joint.
pneumatic cartridge dispenser setup
Connect the gun to a regulated shop air line rated to the tool’s maximum pressure and confirm the cartridge size matches the 310 mL chamber before loading. Purge the line of trapped air before each cartridge change to avoid an uneven first bead, and match the nozzle or static mixer to the material’s working time. Clean the piston rod after each shift to keep cured material from binding the stroke.
Where It’s Used
Pneumatic cartridge dispensers like the MK T1 show up wherever a crew applies the same sealant or adhesive bead repeatedly through a shift: countertop and solid-surface fabrication, cabinetry assembly, sign and display work, marine seam sealing, and general metal fabrication. Running the gun on shop air instead of a hand trigger keeps bead speed and pressure more consistent from the first cartridge to the last, which matters most on long continuous runs or when several operators need to match the same bead profile.
Specifications
| Spec | Detail |
|---|---|
| SKU | CON-DP1K310-CA-130-200 |
| Brand | Medmix (MK T1) |
| Cartridge capacity | 310 mL |
| Max air pressure | 8 bar (116 psi) |
| Max output force | 1.3 kN |
| Frame length | approx. 249 mm (9.8 in) |
| Viscosity range | Low to medium |
Pair this dispenser with a compatible 310 mL cartridge and static mixer from Chemical Concepts’ dispensers, mixers, and nozzles line. Medmix publishes full dispenser specifications on its manufacturer site.
Need Help?
Need help matching the MK T1 to your cartridge material or air supply? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.