Techcon 1212-000-005 Pinch Cushion for TS1212 Valve

Description

Techcon pinch cushion 1212-000-005 is a replacement service part for the TS1212 disposable pinch tube valve. It supports the valve area that pinches the disposable fluid path closed after each dispense cycle.

Techcon pinch cushion Service Role

The TS1212 valve is built to dispense low to medium viscosity fluids through a disposable pinch tube path. Air pressure opens the valve for flow, then spring return closes the path by pinching the tube. A worn cushion can affect shutoff, repeatability, or tube life, so this part belongs in maintenance stock for plants that run TS1212 valves regularly.

• Techcon part number 1212-000-005 for TS1212 valve service.
• Listed by Techcon as the pinch cushion spare part.
• Used with disposable pinch tube fluid paths.
• Supports maintenance work on dot and bead dispensing setups.

Techcon pinch cushion Applications

Use this part when the TS1212 spare parts guide, removed component, or maintenance record calls for 1212-000-005. Inspect the pinch tube, shutoff piston, gasket, and adjustment hardware at the same time. Replacing only one worn part can leave the valve with the same dispense problem after reassembly.

Before service, depressurize the fluid feed and disconnect actuation air according to your plant procedure. Install the cushion cleanly, check the disposable tube path, and run a short dispense test with scrap material before returning the valve to production.

Keep this cushion with the matching TS1212 spare parts instead of mixing it into general hardware bins. Small valve parts are easier to verify when they stay grouped by valve model and part number.

For current manufacturer context, visit Techcon. For valves, tubing, cartridges, and dispenser repair items, browse Chemical Concepts dispensers, mixers, and nozzles.

For help troubleshooting a TS1212 valve or identifying the correct spare parts, call (800) 220-1966 or email [email protected]. Include the valve model, fluid type, and failure symptom.