Description
CHT Group QLE 1037 is a QLE 1037 coating for fabric and cloth applications that need a tough cured silicone layer with excellent adhesion. This two-component addition-cure elastomer is supplied as matching A and B materials and mixes 1:1 by weight for coating work on prepared textile surfaces.
QLE 1037 Coating Benefits
- 100 percent silicone solids formula for fabric and cloth coating jobs.
- Two-part 1:1 by weight mix keeps ratio setup straightforward for small batches and coating trials.
- Long open time gives operators more room for spreading, tooling, or coating setup before gel.
- Cured 65 Shore A elastomer supports a resilient coating on flexible substrates.
- Beige A and B components help identify the material during kit handling.
Use this material when a textile, reinforcement cloth, or flexible fabric part needs a silicone layer that can bend with the substrate after cure. Prepare the surface, mix both sides thoroughly, and run a trial on the actual fabric before production. Coating weight, cure temperature, fabric weave, and line speed can all change the final hand, adhesion, and cured thickness.
Common Applications for QLE 1037 Coating
- Fabric and cloth coating in industrial production.
- Flexible textile parts that need a cured silicone elastomer surface.
- Prototype coating trials where a two-part 1:1 material is preferred.
- Protective layers on prepared reinforcement fabrics and flexible assemblies.
- Coating work that calls for a harder silicone elastomer than soft gel materials.
Compatible Substrates and Process Notes
- Designed for fabric or cloth coating applications.
- Run adhesion checks on each textile because weave, finish, and surface treatment affect results.
- Use clean equipment and mix the A and B sides until the coating is uniform.
- Heat cure at the schedule approved for the part geometry and coating thickness.
QLE 1037 Coating Technical Specifications
| Property | Value |
|---|---|
| SKU | QUA QLE 1037 |
| Product type | Two-component addition-cure silicone elastomer coating |
| Solids | 100 percent silicone solids |
| Mix ratio by weight | 1:1 |
| Uncured appearance | Beige A side and beige B side |
| Viscosity | 130,000 cP A side, 60,000 cP B side |
| Gel time at 25 C | Greater than 24 hours |
| Cured hardness | 65 Shore A |
| Cure example | 30 minutes at 150 C |
Packaging and Ordering
Order this coating when a fabric application needs a two-part silicone elastomer with a long open time and a firm cured surface. Browse related specialty coatings, and review current manufacturer capabilities from CHT.
Need Help?
Need help checking coating method, fabric compatibility, or cure schedule? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.