Techcon

TS5540 Spray Valve Retaining Ring Kit

SKU: TEC5540-SRKIT

Call for pricing and availability
You save

  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Description

The TS5540 Spray Valve Retaining Ring Kit replaces the dispensing valve parts that wear first inside a Techcon TS5540 series precision spray valve: the retaining rings and their backing washers. The kit supplies two retaining rings, two Mylar washers, and two general-purpose washers, along with fitting instructions, so a valve that has started to leak air or lose seating pressure at the nozzle can be rebuilt without replacing the full valve body.

Where these dispensing valve parts fit

TS5540 spray valves run thousands of open-close cycles per shift in automated coating, conformal coating, and light lubrication lines, and the retaining ring and its washer stack absorb that cycling first. Once a ring flattens or a Mylar washer compresses out of spec, the valve loses positive seating and starts to weep fluid or drift in spray pattern between cycles. Maintenance techs on fixed spray stations keep this kit on hand as a scheduled-maintenance item rather than waiting for a valve to fail mid-run, since the fix is a ring and washer swap rather than a full valve teardown.

Service life on these dispensing valve parts

The kit’s Mylar washers resist the compression set that causes a retaining ring to lose preload over repeated cycles, and the steel rings hold their shape through the valve’s rated 100 psi (6.9 bar) system pressure. Installation follows the included fitting instructions and typically takes a few minutes per valve with the spray valve already off the line.

Spec Value
Contents 2 retaining rings, 2 Mylar washers, 2 general washers
Materials Steel rings, Mylar and nylon washers
Compatibility Techcon TS5540 series spray valves only
Max pressure 100 psi (6.9 bar)
SKU TEC5540-SRKIT

Pair this kit with the TS5540 O-ring repair kit for a full seal refresh on the same maintenance pass, since both sets of hardware tend to reach end of service life around the same cycle count. Browse valve repair parts and dispensing accessories for the matching O-ring kit and replacement nozzle caps. For the full TS5540 spray valve platform and spare parts guide, see Techcon.

Need Help?

Need help confirming which TS5540 variant your line runs before ordering this kit? Call (800) 220-1966 or email [email protected].

Additional information

Weight 0.1 lbs
Dimensions 6 × 6 × 6 in
Manufacturer

Product Restrictions

Reviews

There are no reviews yet.

Be the first to review “TS5540 Spray Valve Retaining Ring Kit”

Your email address will not be published. Required fields are marked *