Description
Chem-Set vinyl floor tape provides a conformable yellow marking line in a 4 inch by 60 yard roll for lanes, color coding, and facility layouts. The CVT-560 construction combines a matte soft-PVC backing with a rubber-resin adhesive, giving crews a conformable tape that follows smooth indoor surfaces and wraps around mild curves. This 4-inch width covers more area per pass than narrow striping tape, while the 60-yard roll supports long runs with fewer roll changes.
Where This Yellow Marking Tape Fits
Use the tape to organize warehouses, production floors, service areas, schools, retail back rooms, and temporary event layouts. The yellow surface is easy to recognize at a glance and can also be written on when a layout needs dates, zone names, or routing notes. Its flexible backing is useful for lane edges, staging boxes, tool locations, pipe identification, and other visual-control projects where paint would be inconvenient or difficult to revise.
Surface Preparation and Application
Apply the tape to a clean, dry surface that is free of dust, oil, wax, and loose coatings. Mark the intended line before unrolling, then press the tape down with firm, even pressure from the center toward each edge. Avoid stretching the PVC during installation because stored tension can lift the ends later. Rounded corners and carefully burnished edges help reduce snag points in areas exposed to carts or foot traffic. Test a small section first when the floor has a coating, texture, or recent treatment.
Product Specifications
| Property | Value |
|---|---|
| SKU | CCT-CVT-560-YW-4 |
| Brand | Chem-Set |
| Backing | Matte soft PVC |
| Adhesive | Synthetic and natural rubber resin blend |
| Total thickness | 5.2 mil (0.13 mm) |
| Adhesion to steel | 18 oz/in |
| Tensile strength | 14 lb/in |
| Elongation | 150 percent at break |
| Temperature resistance | Up to 140 degrees F |
| Roll size | 4 in x 60 yd |
| Color | Yellow |
The wide format makes Chem-Set vinyl floor tape a practical choice for layouts that need a strong visual boundary without a permanent coating. Check edges during routine housekeeping, replace damaged sections promptly, and remove the tape slowly at a low angle when changing the layout. Browse Chemical Concepts single-sided tapes for related marking and surface-protection options. For product-family application demonstrations and tape-handling ideas, visit the Chemical Concepts application video library.
Need Help?
Need help choosing a marking-tape width or preparing a coated floor? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.