Replacement Spout for 1 lb Cyanoacrylate Bottles

Description

This 1 lb bottle spout is a replacement dispensing applicator for one-pound cyanoacrylate bottles. It threads onto the standard 1 lb bottle neck and gives shop technicians a controlled, drip-free pour for high-volume CA assembly work where the original twist-cap is worn, lost, or working too slowly for production speeds. A spare set on the bench prevents downtime.

What the 1 lb bottle spout does on the bench

A clean dispensing tip matters on cyanoacrylate. Without one, operators waste adhesive, contaminate the bottle neck, and clog future pours. This spout gives a controlled bead, holds chemistry away from the threads so the cap re-seals cleanly, and survives the solvent exposure that comes with daily use in a wood, plastic, rubber, or metal bonding line. Replacing a fouled spout takes seconds and restores consistent dispense without swapping the whole bottle.

• Replacement applicator for 1 lb cyanoacrylate bottles
• Drip-free controlled dispensing for production benches
• Resistant to cyanoacrylate solvent and vapor
• Threads to standard 1 lb bottle neck
• Reduces waste and cap fouling versus pouring from the bottle directly
• Easy to swap in production without contaminating the bottle

When to swap to a 1 lb bottle spout

Replace the original cap when output slows, when the cap stops sealing, or when an operator switches from low-viscosity to medium-viscosity CA and needs a different dispense pattern. Keep two on the bench so a fouled spout can be cycled out without stopping production. Pair with the right viscosity CA for your bond gap and your assembly speed. Standard practice is one spout per chemistry to avoid cross-contamination between bottles.

For pricing, availability, or compatibility with your bottle, call Chemical Concepts at (800) 220-1966 or email [email protected]. Stock other dispense parts in dispensers, mixers and nozzles, and see the Adhesive and Sealant Council overview of cyanoacrylate technology for handling guidance.