Description
This static mixer is built for 200 ml and 400 ml two-component cartridges using the medmix MIXPAC F-system connection. Thirty-two helical elements run the length of an 8.0 mm bore to blend resin and hardener into a uniform stream before the bead reaches the substrate, to combine the two material streams before discharge.
Where This Static Mixer Fits
Shops running Permabond and other 1:1 or 2:1 structural adhesives in 200 ml and 400 ml side-by-side or coaxial cartridges use this mixer to keep ratio control consistent across long assembly runs. The MIXPAC F-system connection is a common fitting standard across cartridge gun brands, so this mixer drops onto compatible large-format cartridge systems already in a shop’s rotation without an adapter. It suits structural bonding, panel assembly, tank and vessel repair, and any application where an uneven mix shows up later as a soft spot or a bond line that never fully cures.
How the Mix Holds Up Across the Cartridge
At 297 mm long with 32 mixing elements, this static mixer gives resin and hardener enough contact length to fully combine even on higher-viscosity structural pastes, not just thin, easy-flowing systems. The 8.0 mm bore and 11.85 ml hold-up volume are sized for the larger 200-400 ml cartridge format, so back pressure stays manageable in a standard pneumatic or manual cartridge gun instead of forcing the operator to fight the trigger on every stroke. Final mix quality still depends on adhesive viscosity, temperature, flow rate, pressure, and the cartridge-to-mixer match. Validate dispense force, bead uniformity, and cure on the actual process before production.
Static Mixer Specifications
| Property | Value |
|---|---|
| Mixer type | Helical mixer, MIXPAC F-system |
| Reference | MFH08-32T |
| Mixing elements | 32 |
| Inside diameter | 8.0 mm |
| Length | 297 mm / 11.7 in |
| Hold-up volume | 11.85 ml |
| Cartridge fit | 200 ml / 400 ml, 1:1 and 2:1 ratio |
Chemical Concepts stocks this mixer alongside compatible 200-400 ml cartridge guns and other MIXPAC F-system mixer references. Browse the dispensers, mixers, and nozzles category for guns, tips, and mixer sizes that pair with it. This mixer is sold to support Permabond’s 200-400 ml two-component adhesive line. See Permabond for the structural and engineering adhesives it dispenses.
Need Help?
Need help sizing a mixer to your cartridge gun and adhesive viscosity? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.