Description
Sta’-Put SP80 is a high-performance laminate contact adhesive packaged as a pressurized aerosol canister for shop and field use. It is a solvent-based, low VOC, non-chlorinated formula that meets Ozone Transport Commission and California Air Resources Board requirements for special purpose spray adhesives, which matters for shops running regulated shifts in California and OTC states.
Where This Laminate Contact Adhesive Goes to Work
Cabinetry and countertop fabricators use this adhesive to set high-pressure laminate onto substrate, edgeband panel edges, and repair loose laminate seams without pulling a full sprayer into the shop. The canister format suits touch-up work, smaller runs, and field repairs on sign and display projects, general manufacturing lines, and specialty vehicle interiors where a stationary spray rig is not practical.
Because the formula is non-chlorinated and low VOC, it fits shops that already track solvent emissions for compliance reporting. The water-resistant, non-staining bond holds on common HPL substrates without discoloring light laminate colors at the seam. Field crews favor the canister format on repair calls where hauling a drum sprayer to a job site is not practical.
How This Laminate Contact Adhesive Performs in Service
High solids content gives strong initial grab and tack, so panels set fast and stay put through clamping. The cured bond resists moisture exposure, which matters for countertop edgebanding near sinks and cooking surfaces. SP80 also contributes toward LEED and other green building credits and meets NAHB National Green Builders Program criteria when specified on qualifying projects, giving fabricators a documented compliance option for institutional and commercial jobs.
SP80 Specifications
| Attribute | Detail |
|---|---|
| Chemistry | Solvent-based, low VOC, non-chlorinated |
| Compliance | SCAQMD Rule 1168, OTC, CARB |
| Container | 28 lb canister |
| Color | Red |
| Water Resistance | Yes, non-staining |
| Recommended Substrates | HPL, edgebanding, decorative laminate |
| SKU | TACC-SP80-28R |
Order the 28 lb canister when a job needs a regulated-compliant spray adhesive without setting up a drum sprayer. Browse the full contact cement and spray adhesive lineup for larger container sizes and companion primers. For more on solvent-based spray adhesive chemistry and VOC compliance, see the Adhesive and Sealant Council’s adhesive technologies overview.
Need Help?
Need help confirming CARB compliance for your state or picking canister versus drum? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.