Description
Sta-Put Z100 Solvent-Free Postformable Adhesive is a Z100 adhesive for laminating, woodworking, and postforming operations that need a water-based contact adhesive in a 5 gallon pail. It is built for spray, brush, or roller application with clear color and a long open time for coated surfaces.
Z100 adhesive Benefits
- Solvent-free contact adhesive format supports shops moving away from conventional solvent-borne systems.
- Postformable bond line helps laminate work wrap around edges after the adhesive film dries.
- Quick drying profile helps production move from coating to assembly without a long hold.
- High heat resistance supports countertop, cabinet, and panel work where parts may see warm service conditions.
- 5 gallon package fits pressure pot, roller, and brush workflows for repeated shop use.
Use this adhesive when two prepared surfaces need full contact before pressure is applied. Both surfaces should be clean, dry, and free of dust, loose paint, wax, moisture, dirt, grease, oil, rust, and other contamination. Nonporous materials should be roughened and wiped clean before coating.
Common Applications for Z100 adhesive
- Postforming laminate edges in countertop and casework production.
- Bonding decorative laminate to wood, particleboard, MDF, and similar panel substrates.
- Shop-built fixtures, displays, and panels that need even contact adhesive coverage.
- Brush, roller, or stainless spray equipment workflows using compatible hoses and fittings.
Compatible Process Checks
- Apply a uniform coat to both bonding surfaces and allow the film to dry before assembly.
- Use stainless or non-corrosive fluid paths when spraying.
- Apply firm pressure across the full area after the coated surfaces are joined.
- Keep the adhesive at 65 degrees F or warmer before use and do not freeze the package.
Z100 adhesive Technical Specifications
| Property | Value |
|---|---|
| SKU | TACC-Z100-05C |
| Brand | Sta-Put |
| Product type | Solvent-free postformable contact adhesive |
| Base | Polychloroprene latex emulsion |
| Color | Clear |
| Solids | 54.5 percent plus or minus 2 percent |
| Viscosity | 200 to 1,000 cps |
| Open time | Greater than 60 minutes |
| Dry time | 5 to 30 minutes at room conditions |
Packaging and Ordering
Choose this pail for laminate and panel work where a postformable contact adhesive is specified. Browse Chemical Concepts contact cement adhesives for related shop bonding products. For general adhesive education, see the Adhesive and Sealant Council.
Need Help?
Need help matching contact adhesive to laminate, substrate, or application equipment? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.