Techcon TE 25 Gauge Bent Dispensing Needle, 1/2 In 45 Degree, Pack of 50

Description

25 Gauge Bent Needle tips help operators place compatible fluids into tight locations without turning the part or forcing the syringe into an awkward angle. This Techcon TE bent tip uses a 1/2 inch stainless steel cannula with a 45 degree bend, red hub, and pack of 50.

25 Gauge Bent Needle Access Benefits

• 45 degree bend helps reach side walls, pockets, ledges, and close-clearance bond lines.
• 25 gauge size supports controlled dots and fine lines for low to medium-low viscosity fluids.
• 1/2 inch cannula length keeps the tip compact for bench and fixture work.
• Red hub gives quick visual gauge identification during setup.
• Luer-lock connection seats on compatible syringe barrels and dispensing adapters.

Use this bent needle when a straight tip cannot approach the target cleanly. It is well suited for adhesive placement under small components, primer application near edges, rework stations, lab dispensing, and assemblies where the part should stay fixed in a nest or jig.

25 Gauge Bent Needle Handling Notes

Let the bend do the access work. Do not use the cannula as a pry tool, and avoid dragging the tip across metal fixtures or sharp part edges. If the needle clogs, replace it instead of raising pressure sharply, since extra pressure can change dot size and increase splash risk.

Techcon describes the TE bent series as precision-bent 45 degree or 90 degree stainless steel cannula tips with double-helix polypropylene hubs. The line is burr-free, electro-polished for consistent output, silicone and chloride-free, and rated to 100 psi in listed configurations.

Ordering The 25 Gauge Bent Needle Pack

Choose this red 45 degree pack when the process needs compact reach, controlled placement, and fresh tips for repeat work. Pair it with compatible barrels, caps, syringes, and Chemical Concepts dispensers, mixers, and nozzles. For manufacturer information on the dispensing line, visit Techcon.

Need help matching a bent tip to a fixture or bead target? Call (800) 220-1966 or email [email protected].