Techcon TS418 Tapered Dispensing Tip

Description

The Techcon TS418 dispensing tip is a tapered, color-coded polypropylene tip used for low to medium viscosity fluid dispensing across electronics assembly, medical device manufacturing, and industrial bonding lines. Its smooth internal profile minimizes shear, making it a reliable choice for cyanoacrylates, UV adhesives, and solvent-based fluids that suffer when forced through stepped or threaded geometries.

Where the Techcon TS418 dispensing tip fits

Tapered tips like this one are specified when a process needs a clean shutoff, a consistent bead, and low backpressure on the dispense valve. Typical placements include conformal coating touch-up on circuit boards, micro-dot adhesive deposits on small components, fiber-optic potting on telecom and aerospace assemblies, and any production line that runs lower-viscosity bonders through a manual syringe or a controller-driven dispenser. The tapered geometry also reduces clog risk on filled adhesives compared to long thin needles, which matters when you are running anaerobics, threadlockers, or particle-filled epoxies through the same dispense head over a long shift.

Specifications

• Tip style: tapered polypropylene
• Color-coded body for fast line ID
• Compatible with standard luer-lock syringe barrels
• Single-use; replace between fluids to prevent cross-contamination
• Sold individually; bulk packs available on request

Compatible adhesives and dispensing setups for the Techcon TS418 dispensing tip

The TS418 pairs cleanly with the rest of CC’s dispensers, mixers, and nozzles line, including manual syringe guns, foot-pedal controllers, and pneumatic dispense valves. For application engineering on viscosity matching or shot-size programming, the Techcon Systems product reference site carries fluid-compatibility tables and recommended pressure ranges.

Selection notes

Match tip selection to fluid viscosity and shot size, and confirm wettability on the substrate before locking the gauge into a production spec. When in doubt, request samples in two adjacent sizes and run a dot-on-paper trial to compare bead consistency across a sustained run.

Need a different gauge, color, or barrel size? Call (800) 220-1966 or email [email protected] and we will match the tip to your fluid and your dispense controller.