Techcon Tool Holder, 1-1/2 in. Dia, Black Nylon and Steel

Description

The Techcon Tool Holder, 1-1/2 in. Dia, Black Nylon and Steel clamps a larger applicator body, dispensing gun, or air-powered dispensing tool to a bench stand at a fixed position. It handles the larger bore size that dispensing valve parts and full applicator bodies need, where the 1/4 in. tube holder in the same line is too small.

Dispensing Valve Parts That Need a Larger Clamp Bore

A 1-1/2 in. bore accommodates a full dispensing gun body, an air-powered applicator, or a larger cartridge barrel rather than just supply tubing. The nylon liner inside the steel outer clamp keeps the tool surface from scoring or rotating in the holder once the number 6 screw is tightened, which matters on a bench where an operator repositions or removes the tool through a shift. The steel body adds clamping rigidity that a fully plastic holder cannot match at this bore size.

• Bore diameter: 1-1/2 in.
• Mounting: number 6 screw
• Construction: black nylon liner inside a steel clamp body
• Use: holds a dispensing gun, applicator body, or large cartridge barrel on a stand

Mounting Dispensing Valve Parts at a Fixed Working Height

Set the tool through the bore at the working height for the operation, then tighten the number 6 screw until the nylon liner grips the tool body without marring the finish. Because the clamp bore is fixed at 1-1/2 in., confirm the outside diameter of the gun or applicator body before ordering. This holder bolts to most standard bracket rail systems already in use on a manual or semi-automatic dispensing bench.

Order this holder when a bench stand needs a second or replacement mount for a larger applicator body. It pairs with the dispensers, mixers, and nozzles already in service on the line. For general specifications on Techcon’s dispensing tool line, see Techcon.

Need Help?

Need help confirming bore size before ordering a replacement tool holder? Call (800) 220-1966 or email [email protected].