Description
The Cox VBM 100 in this configuration is a hand-powered dispenser for 200 mL two-component cartridges running a 2:1 mix ratio. The plungers advance Part A and Part B at the 2:1 rate the cartridge requires, feeding a static mixer that blends both parts into one bead at the tip. An 18:1 thrust ratio keeps the trigger pull reasonable through medium-viscosity epoxies and acrylics.
Where the Cox VBM 100 fits
This applicator suits 2:1 structural adhesives, potting resins, and sealants packaged in 200 mL dual cartridges. Shops use it for bonding metal, plastic, and composite parts, sealing, shimming, and gap filling where a metered, mixed bead is needed and a pneumatic gun is more tool than the job calls for. Running both parts through a single mixer at the correct ratio removes the guesswork of hand mixing, so the cured joint reaches rated strength every time and the bead stays clean and metered on each pull.
How the Cox VBM 100 holds up
The epoxy-coated steel frame and aluminum handle keep weight near 1.2 kg while shrugging off adhesive and solvent contact. A wear compensation device maintains steady thrust as the gun breaks in, and peak thrust reaches roughly 3.5 kN for thicker two-part chemistries. The 2:1 plunger set is matched to the cartridge so the ratio stays accurate pull after pull.
Specifications
| Spec | Value |
|---|---|
| Type | Manual, two-component |
| Cartridge | 200 mL |
| Mix ratio | 2:1 |
| Thrust ratio | 18:1 |
| Max thrust | 3.5 kN |
| Weight | 1.2 kg |
| Frame | Epoxy-coated steel, aluminum handle |
Confirm your cartridge ratio before ordering and keep matched mixing nozzles on the shelf for clean, blended beads. Browse related dispensers, mixers, and nozzles for nozzles and other ratios, and view the full applicator range from PC Cox.
Need Help?
Need help spec’ing the right mix ratio and mixer for your two-part adhesive? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.