Description
Sia 1950 sanding discs provide a controlled 400-grit cut for refining primer, filler, coatings, and repaired surfaces before the next finishing step. This 6-inch disc uses a 17-hole extraction pattern and hook-and-loop backing, giving body shops, fabrication teams, and finish departments a practical format for orbital sanding. Each box contains 100 discs for repeat work across prep bays and production benches.
Where the 400-Grit Disc Fits
The 400-grit grade is suited to fine surface preparation rather than aggressive stock removal. It can flatten small primer imperfections, soften transitions around repair edges, key cured coatings, and prepare painted or composite surfaces for the next coating stage. Semi-friable aluminum oxide produces a consistent scratch pattern, while the stearate treatment helps limit loading when sanding materials that tend to clog an abrasive face.
The 17-hole layout should be matched to a compatible 6-inch backup pad and dust-extraction system. Aligning the holes keeps airflow open, helps pull debris away from the cutting surface, and makes it easier to inspect the finish between passes. Use light, even pressure and allow the abrasive to cut. Excessive pressure can close the extraction path, create uneven scratches, and shorten useful disc life.
Sia 1950 Sanding Discs in the Finishing Sequence
Begin on a clean, dry surface and confirm that the prior scratch pattern is uniform. Attach the disc squarely to the hook-and-loop pad, check that every extraction hole is open, then sand with overlapping passes. Wipe or vacuum the work area before changing grit so loose particles do not create deeper random scratches. Replace the disc when cutting speed drops, loading remains after cleaning, or the edge no longer sits flat.
Product Specifications
| Property | Value |
|---|---|
| SKU | SIA1866.3684.0400 |
| Series | Sia 1950 Siaspeed |
| Diameter | 6 in |
| Grit | 400 |
| Hole pattern | 17 hole |
| Attachment | Hook and loop |
| Package | Box of 100 |
For additional discs, sheets, belts, and surface-preparation products, browse Chemical Concepts abrasives. For series information and abrasive selection tools, visit Sia Abrasives. Confirm pad diameter, hole pattern, and grit before ordering.
Need Help?
Need help matching a disc to your sander, substrate, or finish target? Call (800) 220-1966 or email [email protected].







Reviews
There are no reviews yet.