Chem-Set 11.25-Inch Hook-and-Loop Sanding Disc, 600 Grit

Description

The Chem-Set 600-grit sanding disc are built for fine finishing on wood, paint, metal, plastic, cultured marble, and solid-surface materials. The film-backed disc uses aluminum oxide abrasive with a non-loading stearate, helping it maintain a consistent cutting surface during detailed sanding. Hook-and-loop attachment makes disc changes straightforward on a compatible backup pad fitted to an orbital or dual-action sander.

Chem-Set 600-Grit Sanding Disc Performance

The 600-grit abrasive is intended for refining an existing finish, blending fine scratches, and preparing a surface for polishing or the next controlled finishing step. A flexible film backing follows mild contours more readily than a rigid paper disc. The open coating used across the finer grit range helps reduce loading. This disc can be used wet or dry when the tool, work area, and material process permit that method.

Chem-Set 600-Grit Sanding Disc Fit and Process Control

Confirm the 11.25-inch diameter, hook-and-loop face, backup-pad condition, and sander speed before starting. Center the disc so its edge does not oscillate beyond the pad. Begin with light, even pressure and keep the tool moving to avoid heat buildup or localized cut-through. For wet sanding, use equipment approved for the environment and manage slurry so the abrasive face stays clear. Replace a loaded, torn, or curled disc before it affects the finish.

Specifications

Match every sanding step to the substrate, coating system, starting scratch pattern, and required final gloss. Use appropriate eye, respiratory, and skin protection for the material being abraded. Browse Chemical Concepts abrasives for adjacent grits and finishing supplies. For application demos across fabrication processes, visit the Chemical Concepts YouTube channel.

Need Help?

Need help selecting a grit sequence and backup pad for a large-format finishing disc? Call (800) 220-1966 or email [email protected].