Techcon Standoff, 1/4 Inch Screw Size, 1/2 Inch OD, Aluminum

Description

A standoff is one of the quiet dispenser parts nobody thinks about until it is missing, at which point a bracket sits crooked, a guard will not seat flush, or a valve mount rattles loose. This Techcon standoff, SKU TEC2800-0677, is sized for a 1/4-inch screw, machined to a 1/2-inch outside diameter, and cut to 1-3/4 inches long in aluminum. It is the spacer Techcon specifies to hold brackets, panels, and mounting plates at a fixed offset on its fluid dispensing equipment.

Specifications for This Dispenser Parts Standoff

• Screw size: 1/4 inch (clearance for 1/4-20 or 1/4-28 fasteners)
• Outside diameter: 1/2 inch
• Length: 1-3/4 inches
• Material: aluminum, lightweight and corrosion resistant
• Style: through-bore spacer, threaded fastener passes through the center

Standoffs like this one do the structural work of keeping two mounting surfaces at a set distance without adding meaningful weight to a stand or bracket assembly. Aluminum is the right material choice here: it will not rust in a shop environment the way a mild steel standoff would, and it machines to a tighter, more consistent bore than most alternatives, which matters when the standoff is doing double duty as a bearing surface for a swiveling bracket.

Where This Dispenser Parts Standoff Is Used

Techcon calls out TEC2800-0677 on bracket and stand assemblies across its dispensing product line, most often where a valve body, a 2 part mixing nozzle bracket, or a control panel needs to sit proud of the frame for cable clearance or hand access. It shows up in the same bills of material as the mounting screws used to rebuild those stands, and it is a common wear-and-tear replacement on equipment that gets disassembled repeatedly for cleaning or valve service, including systems built around jb weld mixing nozzle dispensing.

Because Techcon builds to tight tolerances, substituting a generic hardware-store standoff for this part usually means fighting a bracket that will not sit flat. Ordering the exact Techcon-specified standoff keeps the rebuild simple and keeps the equipment running the way the manufacturer designed it.

Chemical Concepts stocks this standoff alongside the rest of the dispensing valves, mixers, and nozzle hardware used to maintain Techcon dispensing stands and brackets. Call (800) 220-1966 or email [email protected] to confirm fit against your equipment model, or review Techcon’s full parts range through Techcon’s equipment and parts catalog.