Techcon M6 x 25mm Socket Head Cap Screw, Stainless Steel

Description

The M6 x 25mm socket head cap screw (SHC) is one of the most frequently reordered dispenser parts in a Techcon maintenance kit, and Chemical Concepts stocks this fastener as TEC2800-0683 in stainless steel so a technician can pull one exact fastener instead of a full hardware assortment. Socket head cap screws give a hex key a full-depth engagement, which matters when a fastener is torqued down repeatedly during routine valve or nozzle service.

Specifications for This Dispenser Parts Fastener

• Thread: M6, coarse pitch
• Length: 25mm under the head
• Head style: socket head, full cylindrical head with hex drive
• Material: stainless steel
• Sold individually

Stainless was the right call for Techcon’s design here. Fluid dispensing equipment sees flux, solvent, and cleaning-agent exposure that will pit and seize a plated carbon-steel screw over time. A stainless M6 SHC threads and unthreads cleanly years into service, which keeps a valve rebuild or bracket swap from turning into a drilled-out, re-tapped repair.

Where This Dispenser Parts Screw Is Used

TEC2800-0683 shows up in Techcon bills of material for valve body mounting, bracket-to-frame joints, and the smaller fastener points on 2800 and 5000 series stands. It is commonly pulled during the same service call as a 2 part mixing nozzle swap or a static mixing nozzle rebuild, since those jobs often require pulling and reseating the bracket hardware to get clean access to the valve. Shops that also run jb weld mixing nozzle setups on the same line keep a handful of these on the shelf for exactly that reason.

Because the thread, head style, and material all match Techcon’s original hardware, this screw drops straight back into the original tapped hole at the original torque without the fit issues a generic substitute can introduce, particularly on aluminum housings where thread damage from a mismatched fastener is expensive to fix.

Chemical Concepts carries this screw alongside the broader range of dispensing valves, mixers, and nozzle hardware that keep Techcon dispensing equipment in service. Call (800) 220-1966 or email [email protected] for help matching hardware to your equipment, or check Techcon’s own parts documentation through Techcon’s equipment and parts catalog.