Techcon 5000-000-005 TS5000 Valve Mounting Bracket

Description

The Techcon 5000-000-005 mounting bracket is one of the dispensing valve parts used to secure TS5000DMP and TS7000IMP rotary valve platforms in a fixed dispensing setup. It holds the valve body in position so the tip can approach the work surface at a repeatable angle and height during dots, beads, potting shots, or automated dispense paths.

Where These dispensing valve parts Fit

This bracket supports TS5000 Series valve installations on production stands, Z-axis slides, robot arms, and customer-built fixtures. A rotary valve can meter material accurately only when the mount keeps the valve stable. If the bracket is bent, missing, or loosely adapted from another platform, the valve may move during the cycle and turn a stable feed setting into a bad deposit.

The bracket is especially important on automated cells. Techcon user guidance for TS5000 mounting calls for perpendicular valve travel to the work plane and a mounting arrangement that lets the tip gap be adjusted accurately. The bracket gives maintenance and automation teams a known hardware point for that alignment work.

How These dispensing valve parts Support Alignment

Mounting hardware does not touch the material, but it still affects dispense quality. A solid bracket helps hold tip height, prevents side load on tubing and fittings, and keeps the valve from rotating out of position between cycles. That stability helps the controller, valve body, feed screw, and tip do their jobs without compensating for movement in the fixture.

Techcon 5000-000-005 Specifications

Order this bracket when a TS5000 or TS7000 valve needs a proper mount during repair, fixture buildout, or robot integration. Confirm the valve model and available mounting space before installation, then check tip height and perpendicular travel during setup. Browse related dispensers, mixers, and nozzles for compatible valves, receiver heads, tips, and service hardware. Current dispensing platform information is available from Techcon.

For maintenance planning, store this bracket with the valve family it supports rather than with generic fasteners. When a repair bench has the right bracket, screws, tips, and tubing together, a damaged mount can be replaced without improvising hardware that changes valve position. During installation, tighten hardware evenly and verify that tubing is routed without pulling the valve out of alignment once the station starts cycling.

For receiving and setup, compare the part number on the bag or label to the station bill of materials before material is loaded. Small dispensing components often share a size family, color, or connection style, and the wrong part can appear to fit until the first test shot. Keep the old component nearby until the replacement has passed a short dry check and a controlled material test. That simple comparison helps catch fit, pressure, or alignment issues before production fluid is committed to the job, and it makes reorder notes clearer for the next maintenance cycle.

Need Help?

Need help matching a TS5000 bracket to a valve, stand, robot, or fixture layout? Call (800) 220-1966 or email [email protected].