Description
The Chem-Set 103CS-160 cap nozzle is a steel dispensing tip with a 0.160 inch orifice for adhesive applicator and glue guns. The larger orifice lays down a heavier bead for higher-viscosity adhesives and faster fill, where a fine tip would clog or run too slow on thick material.
Where the 103CS-160 cap nozzle fits
This nozzle threads onto Chem-Set cap-style applicator guns and dispensing systems that take the 103CS cap series. The 0.160 inch orifice suits thicker adhesives and larger bead work such as panel bonding, gap fill, and high-throughput assembly. The 103CS family runs from fine to wide orifices (0.076, 0.090, 0.125, and 0.160 inch), so the bead size matches the adhesive and the joint. Operators keep several orifice sizes on hand so one gun covers fine detail beads and heavy fill work.
How the 103CS-160 cap nozzle holds up
Steel construction stands up to repeated cycles and the pressure of dispensing high-viscosity material, which plastic tips do not always survive. The cap design seats and seals on the gun so flow stays consistent across the run. Steel also keeps its shape under torque from a powered or pneumatic applicator, which protects the bead profile over long runs. Wipe the orifice clean between sessions, or cap it, to keep cured adhesive from blocking the bore.
Specifications
| Specification | Detail |
|---|---|
| Orifice | 0.160 in |
| Material | Steel |
| Series | Chem-Set 103CS cap series |
| Fits | Chem-Set cap-style applicator guns |
| Other orifices | 0.076, 0.090, 0.125 in |
Match the orifice size to your adhesive viscosity and bead width before you order. Browse our dispensers, mixers, and nozzles for guns, caps, and replacement tips. For background on adhesive dispensing and bead control, see the Adhesive and Sealant Council adhesives overview.
Need Help?
Need help matching nozzle orifice to your adhesive viscosity? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.