Techcon 533 Male Quick Connect Connector

Description

Techcon 533 connector is a black male quick connect fitting used with pneumatic dispensing adapter hose assemblies. It gives shops an orderable replacement fitting for connecting air tubing to compatible receiver-head and dispenser setups.

Techcon 533 connector Service Benefits

• Provides a defined replacement part for adapter air hose repair and bench-stock programs.
• Helps restore a clean air connection when a fitting is cracked, worn, or missing.
• Supports syringe-barrel dispensing setups that depend on quick connect air lines.
• Black nylon fitting construction suits normal handling around dispenser benches.
• Small part size makes it easy to keep spares with receiver heads, tubing, and O-rings.

Use this connector when the existing assembly calls for part 533 or when the maintenance bill of materials lists the matching quick connect fitting. It is not the fluid tip or syringe barrel itself. It belongs in the air-side connection path used to operate time-pressure dispensing setups.

Where Techcon 533 connector Fits

• Adapter air hoses used with syringe barrel receiver-head assemblies.
• Pneumatic dispenser benches that need quick disconnect service parts.
• Repair kits for damaged air-side fittings on dispensing stations.
• Production cells that change barrels or receiver heads frequently.
• Inventory programs that stock common Techcon fittings by part number.

Surface Preparation And Use

Inspect the hose end and mating coupler before installing the connector. Cut away damaged tubing, check for hardened material or shop debris, and make sure the connection seats fully. A poor air-side fit can create inconsistent dispense response even when the fluid path is clean.

After replacement, test the line at the normal operating pressure and check for leaks. Do not exceed the rated pressure of the hose assembly, dispenser, or fitting. Replace tubing that has become brittle, kinked, or oil-soaked.

Technical Details And Documentation

Techcon lists part 533 as a connector in its 400 series receiver-head category. Additional published product data describes the part as a black nylon male quick connect fitting for adapter air hoses, with barb-to-tube attachment and 100 psi maximum pressure. Review current information from Techcon before setting a maintenance standard.

Ordering Help

For receiver heads, syringe barrels, tubing, and related fittings, browse Chemical Concepts dispensers, mixers, and nozzles. For help matching the fitting to your dispenser, call (800) 220-1966 or email [email protected].