Description
Techcon 12 oz Cartridge Retainer Without Slot is a 12 oz retainer for enclosing plastic cartridges during controlled pressure dispensing. The aluminum sleeve supports 12 oz cartridge setups, twist-locks into compatible retainer caps or dispensing guns, and helps create a rigid pressure vessel around the cartridge during adhesive, sealant, grease, or paste work.
12 oz retainer Benefits
- Fits 12 oz cartridges used in compatible Techcon retainer cap and gun assemblies.
- Aluminum body provides a rigid sleeve around the plastic cartridge during pressurized dispensing.
- Rated to 100 psi (6.9 bar) when used with matched Techcon retainer hardware.
- Without-slot style keeps the cartridge fully enclosed for applications where a viewing slot is not needed.
- Reusable hardware supports repeat bench, production, and maintenance workflows.
Use this retainer when a 12 oz cartridge needs to connect to an air cap, pressure feed, or dispensing gun in a controlled setup. The cartridge sits inside the sleeve, the cap locks to the retainer, and air pressure pushes the material through the outlet selected for the job. That arrangement is common for thicker fluids that need steady force instead of hand pressure alone. Inspect the retainer and cap before use, confirm the cartridge size, and keep threads and lock surfaces clean so the assembly seats correctly.
Common Applications
- Pressure dispensing adhesives, sealants, greases, and pastes from 12 oz cartridges.
- Bench stations that use cartridge retainers with air caps and hoses.
- Production cells that need repeatable material feed from a cartridge reservoir.
- Maintenance replacement when a retainer sleeve is worn, dented, or missing.
Compatible Cartridges and Hardware
- 12 oz plastic cartridges matched to Techcon retainer cap assemblies.
- Compatible dispensing guns and pressure feed accessories.
- Nozzles, caps, and hoses selected for the fluid viscosity and bead size.
12 oz retainer Technical Specifications
| Property | Value |
|---|---|
| SKU | TEC918-047-000 |
| Part type | Cartridge retainer sleeve |
| Cartridge fit | 12 oz |
| Style | Without slot |
| Material | Aluminum |
| Pressure rating | 100 psi (6.9 bar) |
Packaging and Ordering
Order this sleeve as a replacement or spare for 12 oz pressure dispensing setups. For matching caps, nozzles, and cartridge accessories, browse dispensers, mixers, and nozzles. Current cartridge retainer information is available from Techcon.
Need Help?
Need help matching a cartridge retainer to your cap, hose, or pressure setup? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.