Techcon CK6500-20 Static Mixer Conversion Kit for 20 Oz Cartridges

Description

The Techcon CK6500-20 is a conversion kit that lets a TS6500 Series Techkit cartridge mixer run 20 oz (591 mL) two-component cartridge kits. Rather than buying a second mixer for a different cartridge size, a shop swaps in this kit and the same unit covers the larger format, which is the more economical path when a line runs more than one kit size in a day.

The TS6500 Series mixer is a static mixer and metering system built around automatic mixing of two-component adhesives, sealants, and potting compounds packaged in dual-cartridge kits. It uses an automatic fluid-level sensing device and an electronic control system, and its automatic injection feature meters the hardener into the resin evenly through the mix cycle so the ratio stays consistent from the first shot to the last.

Static Mixer Conversion Kit Specifications

• Compatible platform: Techcon TS6500 Series Techkit cartridge mixer
• Configured for: 20 oz (591 mL) dual-cartridge kits
• Function: converts mixer to accept the 20 oz cartridge kit size
• Related kits: CK6500-6 (2.5-8 oz kits), CK6500-10 (1/10 gallon kits)
• Packaging: one conversion kit

Why a Static Mixer Conversion Kit Beats a Second Unit

Two-component dispensing lines rarely run one cartridge size all day. A shop mixing structural adhesives in small kits for one job and larger 20 oz kits for another either needs a mixer dedicated to each size or a way to reconfigure the one it has. The CK6500-20 is the reconfiguration path: it is built to the same automatic injection and fluid-sensing standard as the mixer it fits, so switching sizes does not mean switching to a lower-spec setup.

Because the mix ratio and injection timing are controlled electronically rather than by hand, operators get the same repeatable mix quality regardless of which cartridge size is loaded, which matters most on structural or potting applications where an off-ratio mix shows up as a cure problem days later rather than an obvious defect on the line.

Chemical Concepts stocks the CK6500 conversion kit family alongside the rest of the Techcon dispensing valves, mixers, and nozzles line. For help matching a conversion kit to your TS6500 mixer and cartridge sizes, call (800) 220-1966 or email [email protected]. Techcon’s two-component dispensing resources cover the full TS6500 Series lineup.