Description
Techcon 10 cc EPR O-Ring Pack is a dispensing valve parts item for service work on compatible 10 cc Techcon dispensing assemblies. The listed size is 0.489 inch inside diameter by 0.070 inch cross section, with EPR material and a quantity of 10 for repair benches and spare-part stock.
dispensing valve parts for 10 cc Service
Small seals matter in syringe and valve systems because they affect pressure control, plunger movement, and leak prevention. This pack gives technicians a defined EPR O-ring option when the parts list or removed seal matches the listed 10 cc size. Do not substitute by appearance alone, since similar O-rings can compress differently in service.
Where these dispensing valve parts Fit
- 10 cc dispensing hardware service where the same O-ring dimensions are specified.
- Maintenance kits for Techcon syringe, valve, and fluid-control equipment.
- Repair work after seal wear, material exposure, or cleaning teardown.
- Inventory programs that separate O-rings by material, size, and equipment family.
Technical Specifications
| Property | Value |
|---|---|
| SKU | TECP3017EPK |
| Part type | O-ring service pack |
| Material | EPR |
| Inside diameter | 0.489 in |
| Cross section | 0.070 in |
| Quantity | 10 |
| Use | 10 cc dispensing equipment service |
Measure the removed seal only after checking the correct parts list, because used elastomers can swell, flatten, or shrink. Clean the gland, remove cured material, and inspect the mating surface before installing the new seal. After assembly, test the system at a conservative pressure and verify that the plunger, valve, or fluid path moves without binding or leaking.
Browse related dispensers, mixers, and nozzles for syringes, valves, fittings, cartridges, and repair parts. Current manufacturer background is available from Techcon.
Need Help?
Need help matching an O-ring to a syringe size or dispenser assembly? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.