Techcon TS1201 Dispensing Valve Kit, White Tubing

Description

The Techcon TS1201 white tubing kit packages the core dispensing valve parts for hand-held pinch-tube dispensing: pen body, white pinch tube, and fluid line. This configuration ships without the full accessory bundle, giving assemblers the base valve components sized for lower-viscosity, non-UV fluids. Squeeze the finger lever to close the pinch point and start flow, release to stop, with shot size and flow rate set by the pen’s built-in control rather than an external dispensing controller.

Where These Dispensing Valve Parts Fit

The TS1201 suits bench assembly, prototype builds, and repair stations where a technician dispenses adhesive, lubricant, sealant, or masking fluid by hand instead of running an automated system. Because the fluid only touches the disposable tube assembly, not the pen body itself, one pen handles several chemistries across a shift with a simple tube swap between jobs. That flexibility matters most in low-volume cells where buying a dedicated pen for every fluid would not pay for itself.

How the Dispensing Valve Parts Perform

Limiting wetted parts to the tube assembly means cleanup between fluid changes is a tube swap, not a pen flush. Media viscosity range runs 1 to 45,000 cps, covering thin solvents through heavy-bodied sealants. Repeatability comes from the pen’s built-in shot and flow control, which holds a consistent dispense once the operator sets lever timing for the job. Operators new to the pen typically dial in a working rhythm within the first few cycles of a shift.

TS1201 White Tubing Kit Specs

Order the white tubing configuration for general-purpose adhesives and lubricants where UV exposure is not a factor. Pair it with our dispensing valves and mixers to round out the bench. For pinch-tube maintenance guidance, see Techcon.

Need Help?

Need help matching dispensing valve parts to your fluid viscosity or tubing color? Call (800) 220-1966 or email [email protected].