MALE CONNECT, 1/8 X 3/8, BLACK

Description

These dispenser parts support the air and fluid connections that keep a Techcon dispensing setup working predictably. TSD1002-17 is a black male connector sized 1/8 x 3/8, used when a fitting has worn threads, damaged sealing surfaces, or a connection that no longer holds steady under normal line pressure.

dispenser parts for tubing connections

Small fittings matter because a loose connection can make a good valve look inconsistent. If air leaks, fluid delivery may pulse. If the fitting is contaminated or cracked, the line may move during a shot and change bead placement. Replacing the connector with the correct size keeps the reservoir, controller, valve, and outlet connected without forcing a larger rebuild of the dispensing station.

This fitting belongs in a maintenance drawer with tubing, gauges, regulators, needles, and valve service items. It is especially useful for shops that maintain several benches or production fixtures and want operators to replace like-for-like parts instead of adapting around a damaged connection.

For best ordering accuracy, compare the old part against the machine bill of materials, the tube outside diameter, and the port size on the controller, reservoir, or valve body. Do not force a near-match fitting into service; the cost of the connector is small compared with the downtime from repeated leaks or inconsistent shots.

Choosing dispenser parts before changing settings

Confirm the connector size and thread style before adjusting pressure, timer, or valve stroke. This part is a connector, not a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle style outlet. When a dispense pattern changes, inspect the fittings and tubing before assuming the material, static mixer, or valve has failed.

Browse related dispensers, mixers, and nozzles, or visit Techcon for manufacturer background.

Need Help?

Need help confirming a connector size before ordering? Call (800) 220-1966 or email [email protected].