Techcon TS1400 Valve O-Ring, 3/16 In ID x 1/16 In Buna, Pack of 10

Description

The Techcon TS1400 O-ring is one of the dispensing valve parts that keeps a precision dispense valve sealed under pressure during cycling. This 3/16 in ID by 1/16 in cross section ring is molded from black Buna (nitrile) rubber and rated safe for continuous use to 100 PSI, matching the working pressure range of Techcon’s spool, needle, and spray valve bodies on the TS1400 platform. Each pack holds 10 rings, enough to rebuild two or three valves or keep a running set of spares on the bench so a worn seal does not stall a production line while a replacement ships.

Where These Dispensing Valve Parts Are Used

• Techcon TS1400 series precision dispensing valves running spool, needle, or spray configurations
• Bench and inline dispensing setups for RTV silicone, grease, flux paste, and UV cure gel
• Electronics assembly lines dispensing solder mask, conformal coating, and encapsulant
• General adhesive and sealant dispensing where a consistent, repeatable bead depends on a tight valve seal

Dispensing Valve Parts Specifications

• Material: Buna (nitrile) rubber, black
• Size: 3/16 in ID x 1/16 in cross section
• Pressure rating: safe for continuous use to 100 PSI
• Pack size: 10 O-rings per bag
• Fits spool, needle, and spray valve bodies in the Techcon TS1400 line
• Country of origin: USA

Buna handles most standard adhesives, sealants, and greases without swelling or hardening. If the dispensed fluid is a strong solvent, ketone, or an aggressive cyanoacrylate, ask about the EPR version of this same O-ring before ordering, since EPR resists a broader range of chemistries than Buna and holds up better against fluids that attack nitrile compounds. Replacing this seal on a regular schedule, rather than waiting for a visible leak, keeps dispense volume consistent from shot to shot and protects the rest of the valve from fluid intrusion. Order from our dispensing valve parts and accessories category to match this seal to the rest of a valve rebuild kit. For exploded diagrams and maintenance guidance across the TS1400 platform, see Techcon.

Need Help?

Need help matching this O-ring to your specific Techcon valve model? Call (800) 220-1966 or email [email protected].