Description
TacBond S5841 Canister Adhesive is a fast-drying, low-pressure spray contact adhesive designed for general-purpose industrial bonding and laminating applications. Supplied in a portable canister system, this adhesive delivers strong, permanent bonds across a wide range of substrates while supporting efficient spray application in shop and field environments.
Key Features
- Fast-drying, quick-setting contact adhesive for high-throughput bonding workflows
- Low-pressure spray system supports controlled, consistent adhesive application
- Strong permanent bond performance across multiple substrate types
- Web spray pattern designed for even coverage and reduced material waste
- Good heat resistance for demanding fabrication environments
- High solids formulation supports efficient coverage rates
- Available in multiple canister sizes for shop and field use
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Canister contact adhesive |
| Application Method | Low-pressure spray |
| Dry Time | 3–5 minutes |
| Open Time | 1 hour+ |
| Flash Point | > -20°C |
| VOC | 494 g/L |
| Solids Content | 31% |
| Spray Pattern | Web |
| Shelf Life | 1 year in unopened container |
Compatible Substrates and Materials
- Expanded polystyrene (EPS)
- Fiberglass reinforced plastic (FRP)
- Wood
- Metal
- Fabric
- Foam
Application Guidance
Ensure all bonding surfaces are clean, dry, and free from dust, dirt, and grease before application. Spray adhesive from approximately 6–10 inches away using a smooth, consistent motion to achieve uniform coverage without puddling. For optimal bond strength, apply adhesive to both surfaces with 80–100% coverage and a minimum coat weight of 2.5 dry grams per square foot. Allow the adhesive to dry until tacky before joining substrates, then apply firm, even pressure using a roller or similar tool. Maintain substrate temperatures above 50°F and use only in well-ventilated areas away from ignition sources. Avoid use with equipment or substrates containing copper or aluminum.
Typical Use Cases
- General-purpose laminating and bonding applications
- Bonding EPS and foam materials in fabrication
- Attaching FRP panels to substrates
- Wood, metal, and fabric bonding in assembly processes
- Field and shop-based spray adhesive applications
Target Industries and Buyers
- Construction and building materials
- Panel and composite fabrication
- Furniture and fixture manufacturing
- Insulation and foam fabrication
- OEM assembly operations
- Industrial contractors and installers
Performance Advantages
Compared to traditional bulk-applied adhesives, this canister-based system provides consistent spray delivery, faster setup, and reduced application variability. Its combination of fast dry time, extended open time, and broad substrate compatibility makes it a practical option for general-purpose bonding where efficiency and ease of use are important.
Ordering Information
- TB-8030-30 — 30 lb canister
- TB-8030-150 — 150 lb canister
- TB-8030-300 — 300 lb canister
Common Questions
Q: What type of adhesive is TacBond S5841?
A: It is a low-pressure spray canister contact adhesive designed for general-purpose bonding.
Q: How fast does the adhesive dry?
A: The typical dry time is 3–5 minutes depending on conditions.
Q: What is the open time for assembly?
A: The open time is approximately 1 hour or more.
Q: Can this adhesive be used on foam or EPS?
A: Yes, it is designed to bond EPS, foam, and other common substrates.
Q: What spray pattern does it produce?
A: It produces a web spray pattern for even coverage.
Q: What is the VOC content?
A: The VOC content is 494 g/L.
Q: When does full bond strength develop?
A: Full bond strength is typically achieved within 24–48 hours.
Q: Are there material restrictions?
A: Yes, avoid use with copper or aluminum substrates and equipment components.
Reviews
There are no reviews yet.