Description
The ASI 174 clear 5.5 oz squeeze tube holds clear siliconized acrylic latex caulk from American Sealants in a hand-squeeze package, no caulking gun needed. It suits small joints where the bead should disappear, like a glass edge, a tile corner, or a touch-up on stone. It goes on white and turns clear in about 2 weeks. Made in the USA.
Part of the ASI 174 family. This is the clear 5.5 oz squeeze tube. ASI 174 also comes in white and clear, in 10.2 oz cartridges and 5.5 oz squeeze tubes. See every ASI 174 size and color, with white and clear specs side by side and the full application steps.
Key Product Details
| Property | Value |
|---|---|
| SKU | ASI-174-CLEAR-5OZ |
| Color | Clear |
| Package | 5.5 oz squeeze tube |
| Dispensing | Squeezed by hand, no caulking gun needed |
| Chemistry | One-component siliconized acrylic latex, no mixing |
| Cured appearance | Applies white, turns clear in about 2 weeks at normal curing conditions |
| Viscosity (Spindle 7, 4 rpm) | 679,000 cps |
| Skin formation time (70°F, 50% RH) | 60 minutes |
| Hardness (ASTM C661) | 50 Shore A |
| Elongation at break (ASTM D412) | 600% |
| Solids | 61% |
| Density (ASTM D1475) | 9 lb/gal |
| Gun grade | Pass, non-slump |
| QUV weathering (ASTM G154) | Pass, 4,000 hours |
| Service temperature | -20°F to 180°F, intermittent to 230°F |
| Application temperature | 40°F to 90°F |
| Paint over | Latex paint after 2 hours, oil-based paint after 24 hours |
| Full adhesion and strength | 7 days |
| Primer | Not normally required |
| Cleanup | Warm water while wet |
| Freeze-thaw | Passes 5 freeze-thaw cycles without harm to the product |
| Approvals | ASTM C834-05, Type C VOC compliant |
| Shelf life | 12 months from date of shipment at 70°F and 50% RH |
| Country of manufacture | USA |
Choosing the Clear 5.5 oz Squeeze Tube
- No gun to carry. The tube rides in a tool bag or service van for punch-list stops.
- The smaller package leaves less material over when the job is only a few joints.
- For long runs, the 10.2 oz cartridge carries nearly twice the material and runs in a caulking gun.
- Clear takes about 2 weeks to turn clear, longer in cool, humid weather. Don’t judge the joint the next morning.
Frequently Asked Questions
Do you need a caulking gun for the ASI 174 clear 5.5 oz tube?
No. The ASI 174 clear 5.5 oz squeeze tube is dispensed by hand, so no caulking gun is needed.
Does clear ASI 174 dry clear?
Yes, in about 2 weeks. Clear ASI 174 applies white and turns clear at normal curing conditions, and cooler temperatures and higher humidity make it take longer.
Can you paint over clear ASI 174?
Yes. Clear ASI 174 takes latex paint 2 hours after application and oil-based paint after 24 hours. If you’re unsure about a specific paint, test it first.
What ASTM standard does clear ASI 174 meet?
Clear ASI 174 meets ASTM C834-05 Type C and is VOC compliant. White is the grade that carries ASTM C920 Class 12.5.
How long does ASI 174 keep in the squeeze tube?
Shelf life is 12 months from date of shipment when stored at 70°F and 50% RH. High temperature and high humidity shorten it, and the tubes should be kept from freezing.
Related Products
- ASI 174 Siliconized Acrylic Latex Sealant family page for every size and color, white and clear specs side by side, and the full application steps
- Albion 7/8 in Caulk Tooling Spatula for tooling the bead
Questions on fit for your joint? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.