Techcon TS1050 Spreader Nozzle 1/2 Inch x 1/16 Inch

Description

Techcon TS1050 nozzle is a precision molded polyethylene spreader tip for operators who need a flat 1/2 inch by 1/16 inch bead instead of a round dot or narrow line. It fits Techcon cartridges and equivalent systems, which makes it useful for adhesive, sealant, and paste applications where coverage width matters as much as flow control.

Why Techcon TS1050 nozzle helps wide-bead dispense work

• Creates a broad, shallow laydown that covers more surface area in one pass.
• Reduces the need to trim a standard tip by hand before starting a job.
• Helps crews keep bead geometry more consistent from part to part.
• Supports cleaner spread patterns on seams, flanges, and panel faces.
• Fits established cartridge workflows without adding a complicated setup step.

On bench assembly, panel layup, and repair jobs, the Techcon TS1050 nozzle gives crews a repeatable spread pattern without improvising outlet shape at the station. That saves setup time, reduces wasted material, and keeps the bead profile closer to what the process actually calls for.

Techcon TS1050 nozzle size and fit

• Orifice size is 1/2 inch by 1/16 inch, listed by Techcon as 12.4 mm by 1.52 mm.
• Molded from PE in a natural finish for disposable line-side use.
• Designed to fit Techcon cartridges or equivalent cartridge systems.
• Useful when a flat ribbon of material is preferred over a tall round bead.

This tip is a good match for gasketing, seam sealing, surface wet-out, or any application where too much bead height creates extra tooling work after dispense. Keep it with related applicator hardware in the dispensers, mixers, and nozzles category so operators can grab the right outlet as material and bead width change.

For manufacturer information on cartridge accessories and dispensing compatibility, visit Techcon.

Need help matching the right spreader tip to your cartridge size or fluid? Call (800) 220-1966 or email [email protected].