Techcon 1201PE Dispensing Tube, Black 0.1 in ID (Pack of 10)

Description

The Techcon 1201PE dispensing tube is dispensing valve parts for the TS1201 pinch tube pen, supplied in black polyethylene for UV cure adhesive work. Each pack holds ten pre-assembled tubes with a male Luer lock outlet and a female inlet, ready to install without additional fittings. The tube is the only part of the pen that contacts fluid, so it is replaced between jobs or material changes rather than cleaned.

Where dispensing valve parts protect UV cure fluid paths

UV cure adhesive cures on light exposure, so a clear tube can start setting material inside the fluid path under shop lighting. The black tube blocks that light and keeps UV cure fluid liquid until it reaches the substrate. Because the TS1201 pen design keeps all wetted contact inside the disposable tube, swapping tubes between material types avoids cross contamination without disassembling or cleaning the pen body.

This 0.1 inch ID tube is sized for the pen’s standard fluid path and terminates male to female, matching the TS1201 outlet and letting tubes chain to dispense tips or extensions.

How dispensing valve parts differ by tube color and material

Techcon offers this tube in black PE for UV cure fluids and in natural PE or PU for general two part and cyanoacrylate use. It differs from a disposable mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle. Those mix material at the outlet, while this tube is the pen’s dedicated feed path and is selected by fluid sensitivity and ID size rather than mixing function.

Dispensing valve parts specifications

Order this tube when running UV cure fluids on a TS1201 pen or when rotating fresh feed lines between jobs. For pinch tubes, mixers, and nozzles across the platform, browse dispensers, mixers, and nozzles. For TS1201 pen and tube specifications, visit Techcon.

Need Help?

Need help matching tube ID or color to your UV cure or two part fluid? Call (800) 220-1966 or email [email protected].