Lord 310 Epoxy Adhesive 310-B Black, 5 Gallon Pail

Description

Lord 310 epoxy adhesive is a modified, thixotropic, two-component epoxy that bonds prepared metals, rubber, urethane, and plastics. This item is the black 310-B component, supplied in a five-gallon pail to pair with the matching resin for larger production runs.

Where the Lord 310 epoxy adhesive fits

This system bonds disk drives, downhole oil field equipment, automotive body panels and spoilers, and vibration damping mounts. The thixotropic body stays put on vertical surfaces and in gaps, so it holds position on upright parts and fills bond lines without running before it sets. It suits high-volume bonding lines and larger parts where a five-gallon pail feeds a meter-mix machine rather than hand-mixed batches.

How the Lord 310 epoxy adhesive performs

The cured bond performs from minus 40 degrees F to 400 degrees F and resists postbakes up to 400 degrees F, which suits parts that see heat downstream. It contains no solvent, is nonflammable and virtually odorless, and resists moisture, sunlight, salt spray, and thermal cycling. Cure at room temperature or add heat for faster processing. That temperature range and postbake resistance make it a fit for motors, electronics housings, and downhole tools that see heat and chemical exposure after assembly.

Specifications

Order the 310-B component to match your resin volume and plan mixing for the pail size before a production run. Browse our epoxy adhesives for companion resins and smaller cartridge formats, and see the Parker Lord line for the full 310 system. Meter and mix the pail through equipment rated for the correct ratio, and clean tools before the epoxy sets.

Need Help?

Need help pairing 310-B with the right resin or spec-ing cure for your parts? Call (800) 220-1966 or email [email protected].