Techcon 400 Series Luer Lock Syringe Barrel, 6cc

Description

A clear polypropylene barrel with a secure tip connection keeps a dispensing setup leak-free from the plunger to the needle, and this 6cc syringe barrel gives that connection through a luer lock tip rather than a friction-fit slip tip. The barrel is molded from natural (translucent) polypropylene, letting the operator see fluid level and flow during a dispensing run.

Where This Syringe Barrel Gets Used

This syringe barrel fits Techcon’s 400 Series dispensing platform, used with either an air powered plunger for automated dispensing or a manual plunger for hand assembly work. The luer lock thread on the tip holds a dispensing needle or tip cap under pressure without popping loose mid-cycle, which matters most on air powered setups running higher pressures than a hand squeeze allows.

How This Syringe Barrel Holds Up

Polypropylene resists most solvents and adhesive chemistries used in bench dispensing, and the luer lock thread is molded into the barrel rather than added as a separate fitting, so there is no secondary seal to fail at the tip. At 6cc capacity, this barrel suits small to mid-size dispensing jobs where frequent refills are acceptable in exchange for a lighter, easier to handle barrel. Choosing luer lock over a slip-tip barrel is mostly a question of pressure and duty cycle: shops running higher air pressure or longer production runs see fewer tip separations with the threaded connection.

Order this barrel when standardizing on luer lock tips and needles across a dispensing line, or as a direct replacement for a cracked or clouded barrel. Pair it with matching stoppers and plungers from our dispensing, mixing, and nozzle accessories category. Techcon’s full 400 Series barrel range is on its manufacturer site.

Need Help?

Need help choosing barrel capacity or tip style for your dispensing setup? Call (800) 220-1966 or email [email protected].