Techcon 400 Series Syringe Barrel, 6cc Luer Lock

Description

This Techcon 400 Series syringe barrel holds 6cc and terminates in a luer lock tip, giving it a threaded connection that locks a dispensing needle or nozzle in place rather than relying on a friction fit that can pop loose under air pressure. Molded in natural high density polypropylene, the barrel has end flanges that seat into a receiver head or barrel adapter, completing the path from a bench dispenser or hand plunger through to the tip. It is sized for small batch and precision dispensing work where a 10cc or larger barrel would hold more material than a job needs.

Where This Syringe Barrel Gets Used

Electronics assembly, medical device manufacturing, and general bench dispensing use this barrel for small, controlled shots of adhesive, flux, grease, or potting compound where a luer lock tip connection matters for repeatability. The 6cc capacity fits jobs run in short bursts across a shift, letting an operator refill more often rather than working from a larger barrel that risks material curing before it is used. Shops running mixed production, where the same station dispenses several different low volume materials in a day, favor this size because a partially used barrel is a smaller loss than a partially used 10cc or 30cc barrel.

Fit and Handling for This Syringe Barrel

Load the barrel from the open end with the plunger before capping it with the matching tip cap, and use it with a compatible piston to push material out under manual or air pressure. Because the luer lock thread locks the tip in place, this barrel resists the tip popping off mid dispense the way a slip tip can under higher pressure or a longer needle. Discard the barrel once material has cured inside it rather than attempting to clean and reuse it, since dried residue changes flow characteristics on the next fill.

Order this syringe barrel for bench dispensing stations running small batch work, or stock it alongside matching plungers, receiver heads, and luer lock tips for a complete 400 Series setup. Browse Chemical Concepts dispensing valves, mixers, and nozzles for the rest of the 400 Series lineup, or see the complete Techcon dispensing system.

Need Help?

Need help matching barrel capacity or tip style to your dispensing setup? Call (800) 220-1966 or email [email protected].