Techcon 400 Series Receiver Head, 6cc, 6 ft Hose

Description

The Techcon 6cc receiver head is the connector that links a 400 Series syringe barrel to an automated or benchtop dispensing controller. It carries regulated air pressure down a sealed line to the barrel, giving the operator a secure push instead of a loose fitting that can pop off mid-cycle. The fitting is sold as an individual replacement part, so a worn hose or o-ring does not mean replacing the whole controller.

Where the Techcon 6cc Receiver Head Is Used

Assembly lines running small dispense volumes of adhesive, potting compound, conformal coating, or lubricant rely on this fitting to keep a 6cc syringe barrel connected to the air supply during automated cycles. The 6 foot hose gives the barrel enough reach to sit at a fixture, jig, or robot arm while the controller itself stays mounted at the workstation or on a cart. Electronics assembly, small-parts bonding, and general manufacturing lines that already run Techcon 400 Series syringe barrels use this receiver head as the standard connection point between the barrel and the controller.

Because the receiver head is a wear part, plants that run multiple shifts typically keep a few on hand. The Viton O-ring is the first component to degrade under repeated pressure cycling, and a worn seal shows up as inconsistent dispense volume or a slow leak at the fitting rather than a hard failure, which makes it easy to miss until output quality drifts.

Techcon 6cc Receiver Head Specifications

The receiver head ships ready to thread onto a compatible 400 Series barrel, with the Viton O-ring already fitted for an airtight seal. An optional in-line filter (Techcon part 881-000-000) is available for lines running without a fitted piston, protecting the controller from any particulate that can migrate back up the hose. For fixture layouts where the barrel needs to travel further from the controller, the 6 ft version gives more working room than the 3 ft option without adding noticeable lag to the dispense cycle. Browse Chemical Concepts dispensing equipment for compatible barrels, pistons, and nozzles. For additional technical resources on Techcon dispensing hardware, visit Techcon.

Need Help?

Need help matching a receiver head to your syringe barrel size? Call (800) 220-1966 or email [email protected].