Techcon 400 Series Tip Cap for 10cc Taper Syringe, Qty 1000

Description

Every dispensing needle or taper tip needs a cap between uses to keep adhesive, sealant, or lubricant from skinning over in the tip and clogging the next shot. Techcon’s TEC19T-1000, cross-referenced to the manufacturer’s EA19T-1000, is the 400 Series tip cap built to seal the tip end of a 10cc taper syringe barrel on Techcon’s EA410T assembly. It ships in a case of 1,000, sized for shops that run dispensing lines fast enough to go through caps by the box rather than the handful.

Specifications for This Dispensing Needle Cap

• Compatible with: Techcon 400 Series, EA410T 10cc taper manual syringe assembly
• Color: red, for quick visual identification against other cap sizes on the bench
• Quantity: 1,000 per case
• Material: molded plastic, friction fit over the taper tip

A tip cap does simple but essential work on a manual dispensing line. Once a taper tip is attached to a filled syringe barrel and set down between shots, an uncapped tip skins over within minutes for most adhesives and sealants, wasting the tip and sometimes the whole barrel. Capping the tip the moment it is set down keeps the next dispense clean and keeps operators from re-priming a clogged tip mid-shift.

Where This Dispensing Needle Cap Fits

Techcon designs the 400 Series as a matched system, so the EA19T-1000 cap is sized specifically for the EA410T 10cc taper barrel rather than as a universal fit. Techcon’s own documentation is explicit that its components are intended for use with other Techcon parts, which is why the cap, the barrel, and the taper tip it protects are sold as coordinated SKUs rather than mixed with a generic tip or barrel from another manufacturer. Production lines running high-volume manual dispensing typically standardize on one cap color per barrel size across the bench, which is part of why Techcon ships this cap in red specifically for the 10cc taper size.

Because the caps are inexpensive relative to a wasted tip or a clogged syringe, most shops treat them as a consumable and reorder by the case rather than trying to stretch a partial box across a production run.

Chemical Concepts stocks this tip cap alongside the full range of dispensing valves, mixers, and nozzle hardware used on Techcon 400 and 700 Series dispensing systems. Call (800) 220-1966 or email [email protected] to confirm compatibility with your syringe barrel size, or review Techcon’s complete dispensing needle and tip cap lineup through Techcon’s equipment and parts catalog.