Chem-Set SmartPak 600 ml Battery Powered Dispensing Gun Kit

Description

The Chem-Set 600 ml SmartPak gun battery kit dispenses foil pouch adhesives without the strain of a manual gun and without an air line. Production teams running structural adhesives, urethanes, or methacrylates from SmartPak pouches use this rig to empty a 600 ml pack in roughly two minutes, which keeps cycle times short and operators steady through long shifts at the bench.

What the SmartPak Gun Battery Kit Includes

Every kit ships with the SmartPak dispensing tool plus four manifolds, two rechargeable batteries, and one dual-bay charger that handles both packs at once. Swap batteries when one runs low and the second is already charged, so a shift never stops for power. The manifolds match the SmartPak foil pouch geometry and lock in cleanly without tools or fasteners.

Why Teams Pick the SmartPak Gun Battery System

Manual caulk guns wear out hands on high-volume work, and pneumatic guns tether the operator to a hose. The battery driven SmartPak gun removes both problems. Operators move freely between assembly stations, and the consistent push pressure produces a more even bead than hand-driven tools. Pair the gun with SmartPak pouches and the system uses under 1 percent of the plastic of a standard cartridge, which trims both waste handling and cost per dispense.

Setup and Maintenance

Charge both batteries fully before the first shift. Slide a fresh manifold onto the pouch, seat the assembly in the gun, and squeeze the trigger to dispense. Wipe the manifold mating face after each pouch to keep adhesive from curing on the seal. Rotate batteries through the charger to keep one ready and one in service at all times.

Specifications

For SmartPak pouch adhesives and other dispense hardware, see the structural adhesives catalog on Chemical Concepts. Background on foil pouch packaging waste reduction is summarized at EPA.gov.