Cox AirFlow 1 CBA 600S Pneumatic Sausage Gun, 2x600mL 1:1

Description

The Cox AirFlow 1 CBA 600S is a two-component pneumatic sausage gun built for dual 600mL foil packs, roughly two 20 oz sausages, at a 1:1 mix ratio. Air-powered flow drives soft-pack material smoothly, so two-part adhesives and sealants meter evenly while cutting the packaging waste of rigid cartridges.

Cox AirFlow Pneumatic Sausage Gun Overview

This model runs the AirFlow Series 1 air system for steady, regulated output across large foil packs. The trigger meters air pressure rather than hand strength, which keeps the bead even and reduces fatigue on high-volume runs. An extra manifold is available for the sausage format. Foil packs also reduce shipping weight and disposal compared with hard cartridges of the same volume.

Specifications

• Brand: Cox (Sulzer Mixpac)
• Pack format: dual 600mL foil sausage packs, 2 by 600mL
• Mix ratio: 1:1
• Air system: Series 1
• Component: two-component
• Manufacturer number: DP2C 1200-01-525-119

Applications for This Pneumatic Sausage Gun

The AirFlow 1 CBA 600S suits high-volume bonding, sealing, and potting in construction, synthetic turf, pool, and sign and display work that uses 1:1 two-part material in foil packs. Soft-pack dispensing is a good fit where crews want less rigid-cartridge waste and lower per-shot packaging cost. Match it with the correct static mixing nozzle from our dispensing guns, mixers, and nozzles category.

Setup and Nozzle Selection

Correct nozzle choice drives mix quality on every shot. Load the foil packs into the manifold, fit a fresh static mixing nozzle sized for the material and mix ratio, then set the air regulator to the lowest pressure that gives a clean, continuous bead. Purging a short length before the first application clears any off-ratio material at the tip and confirms the two parts are fully blended before use.

Ordering and Support

Chemical Concepts stocks Cox dispensing equipment and the mixing nozzles that go with it. For help matching this gun to your foil packs and material, call (800) 220-1966 or email [email protected]. More equipment detail is available from Cox.