Cox AirFlow 1 VBA 400A Pneumatic Dispensing Gun, 400mL 10:1

Description

The Cox AirFlow 1 VBA 400A is a two-component pneumatic dispensing gun built for 200mL and 400mL side-by-side Total System cartridges at a 10:1 mix ratio. Air-powered actuation delivers steady, controllable flow, so two-part adhesives, sealants, and epoxies meter and mix accurately from the first bead to the last.

Cox AirFlow Pneumatic Dispensing Gun Overview

This tool runs on the AirFlow S1 high-power air system for consistent output under load. The trigger regulates air pressure instead of relying on hand strength, which cuts operator fatigue on long production runs and keeps output even across the full cartridge. Swap the correct static mixing nozzle onto the cartridge for the material being applied and the gun handles the rest.

Specifications

• Brand: Cox (Sulzer Mixpac)
• Cartridge capacity: 200mL and 400mL Total System
• Mix ratio: 10:1
• Air system: S1 high power
• Component: two-component
• Manufacturer number: DP2C 400-10-525-111

Applications for This Pneumatic Dispensing Gun

The AirFlow 1 VBA 400A fits structural bonding, potting, and sealing work across sign and display, synthetic turf, pool, and general construction, wherever 10:1 two-part cartridges are specified. Air actuation makes it well suited to higher-viscosity materials and repetitive dispensing where a manual gun would slow an operator down. Match it with the right nozzle and cartridge from our dispensing guns, mixers, and nozzles category.

Setup and Nozzle Selection

Correct nozzle choice drives mix quality on every shot. Load the cartridge, fit a fresh static mixing nozzle sized for the material and mix ratio, then set the air regulator to the lowest pressure that gives a clean, continuous bead. Purging a short length before the first application clears any off-ratio material at the tip and confirms the two parts are fully blended before they reach the work.

Ordering and Support

Chemical Concepts stocks Cox dispensing equipment along with the mixing nozzles that pair with it. For help matching this gun to your adhesive, cartridge, and mix ratio, call (800) 220-1966 or email [email protected]. Product engineering details are available from Cox.