Albion B12B30W B-Line 30 oz Manual Bulk Gun

Description

The Albion B12B30W B-Line 30 oz manual bulk gun is used in **syringe barrel** style bulk dispensing work where material is loaded into the barrel rather than dispensed from a disposable cartridge. It has a 12:1 mechanical drive, a steel barrel, nitrile rubber piston cups, nitrile cap gaskets, and three orange cone nozzles.

### Where this syringe barrel bulk gun fits

Bulk guns are useful when crews apply water-based products in volumes that make standard cartridges inefficient. Chinking, acoustic sealants, acrylic firestopping, and similar water-based materials can be packed into the barrel and pushed through a cone nozzle by hand. The B12B30W gives installers a controlled manual applicator for field work, repair work, and production tasks where air tools are not practical.

The nitrile rubber piston cups and cap gaskets are the key difference from leather-equipped bulk guns. Nitrile is a better fit for water-based materials because it does not rely on leather swelling or conditioning to maintain the seal. That helps the plunger travel consistently through the barrel and keeps material moving toward the nozzle instead of bypassing the piston. The full-size rotating swivel handle also helps the operator keep the bead angle comfortable around corners, seams, and vertical joints.

### How this syringe barrel applicator is loaded

Before filling, confirm the barrel, piston, cap, and nozzle are clean. Load the material according to the shop’s bulk-gun process, seat the piston, and tighten the cap without cross-threading. Prime the nozzle slowly until material reaches the tip, then apply a short test bead to check flow. If the bead spits or pulses, inspect the barrel for air pockets and check whether the piston cup is seated evenly.

After use, clean water-based material before it dries in the barrel. Leaving cured residue inside the tube can score the piston cup and make the next fill harder to seal. Keep spare nozzles and gasket parts with the applicator so the gun can be returned to service quickly between jobs. Store the barrel with the pressure released and the cap loose enough that seals are not compressed between uses.

### Specs for this syringe barrel gun | SKU | ALB-B12B30W |
| -| -|
| Model | B12B30W B-Line |
| Tool Type | Manual bulk loading gun |
| Capacity | 30 oz |
| Drive Ratio | 12:1 |
| Barrel | Steel |
| Piston And Gaskets | Nitrile rubber |
| Included Nozzles | Three orange cone nozzles | Choose this model when water-based materials need a manual bulk applicator with nitrile sealing parts. Browse related [dispensers, mixers, and nozzles](https://www.chemical-concepts.com/product-category/dispensers-mixers-nozzles-3/) for replacement nozzles and cartridge equipment used beside this tool. For manufacturer background on applicator families, visit [Albion Engineering](https://www.albioneng.com).

### Need Help?

Need help choosing between cartridge, sausage, and bulk loading applicators? Call [(800) 220-1966](tel:8002201966) or email [[email protected]](mailto:[email protected]).