Albion 600 Series B-Line 1:1 And 2:1 Manual Cartridge Gun

Description

The Albion B26T600 dispenser is a manual two-component gun for 600 Series side-by-side cartridges. It is set up for 300 x 300 mL cartridges at 1:1 and converts to 300 x 150 mL cartridges at 2:1 with the included parts, answering the central fit question before material is loaded.

Cartridge Ratios And Application Fit

The 26:1 B-Line drive produces up to 900 lbf of thrust and 167 psi, supporting controlled application of thicker two-part epoxies and other compatible adhesives. The full carriage contains both cartridge cylinders, while the manual format works without a hose, battery, or compressor. Common tasks include construction joints, crack injection, adhesive installation, chemical anchoring, countertop fabrication, transportation repair, and general assembly.

Albion B26T600 Dispenser Specifications

Match the installed pistons and push plates to the cartridge ratio before each use. Seat both cylinders evenly, attach a mixer that fits the cartridge outlet, and purge the first small amount of mixed material according to the adhesive procedure. A sudden rise in trigger force can indicate a blocked mixer, cured material at the outlet, or a cartridge that is not seated squarely. Stop and correct the fit rather than forcing the drive.

Label ratio conversion parts and store them with the gun. This keeps the 1:1 and 2:1 configurations distinct during changeovers and helps operators verify that both plungers advance at the intended relative rate before adhesive reaches the mixer.

Find compatible dispensers, mixers, and nozzles for 1:1 and 2:1 cartridge systems. Visit Albion Engineering for manufacturer resources covering 600 Series tools and conversion configurations.

Need Help?

Need to verify ratio parts, cartridge size, or mixer compatibility? Call (800) 220-1966 or email [email protected].