Albion 400 Series B-Line Manual Cartridge Gun (10:1)

Description

The Albion B-Line cartridge gun handles twin side-by-side cartridges from 450 to 490 ml at a 10:1 mix ratio, built for shops running solid surface seam adhesives and other high-viscosity two-part systems that need consistent, powered delivery.

Where the Albion B-Line Cartridge Gun Works

Solid surface fabricators use this gun to dispense seam adhesives for Corian, Integra, and comparable acrylic solid surface material, where an even 10:1 ratio matters for cure and color match at the seam. The same drive handles two-part epoxy, acrylic, polyurethane, silicone, polyester, and polyurea systems packaged in the same twin-cartridge format, so the gun covers structural bonding and general assembly work beyond seaming alone. Cabinet shops and countertop fabricators running mixed material lines often keep one of these guns dedicated to seam work so the trigger feel stays consistent from job to job.

How the Albion B-Line Cartridge Gun Holds Up

A 26:1 thrust ratio drive gives smooth, powerful output through thin or thick material without excess hand fatigue over a full work day. Double gripping plates and a steel trigger add durability under repeated shop use, and a built-in adjustment screw lets the operator take up wear over the tool’s life instead of living with wasted trigger motion as components age. The full-size handle spreads grip pressure across the hand rather than concentrating it at the fingers, which matters on long dispensing runs.

Pair this gun with a static mixer sized to the cartridge and adhesive viscosity you’re running. A mismatched mixer wastes material and can leave the ratio uneven at the tip, which shows up as a soft or discolored seam later. Browse the Chemical Concepts dispensing, mixer, and nozzle line for matching mixers and nozzles.

For dispensing tool background, see the Albion engineering page.

Need Help?

Need help matching mixer size or thrust ratio to your adhesive? Call (800) 220-1966 or email [email protected].