Techcon Back Plate for 2.5 oz, 6 oz, and 8 oz Cartridge Holders

Description

The Techcon back plate for 2.5 oz, 6 oz, and 8 oz cartridge holders is a replacement dispensing valve parts component for cartridge holder service. It belongs in the hardware stack that supports small cartridges during adhesive, sealant, grease, or paste dispensing.

dispensing valve parts for cartridge holder repair

A back plate helps keep the holder assembly rigid and correctly positioned. When the plate is bent, missing, or worn at contact points, the cartridge can sit unevenly and the operator may feel extra resistance during loading or dispensing. Replacing the back plate gives the rest of the holder assembly a clean mounting surface and helps restore the original service geometry without replacing a full dispenser.

This part is tied to the 2.5 oz, 6 oz, and 8 oz holder format named for the product. During a rebuild, inspect the holder body, retaining collar, plunger, and fasteners at the same time. Clean away cured material before installing the plate, then check that the cartridge seats fully and releases cleanly. If shot consistency is still off after the mechanical stack is corrected, move downstream to the tip, receiver, or material path.

dispensing valve parts specifications

When several holder sizes are serviced in one area, keep back plates separated by cartridge size. That prevents a plate from being forced into the wrong assembly and protects the holder hardware from avoidable wear.

Order this back plate when the existing holder hardware needs a direct replacement to complete the repair. For related holders, collars, barrels, tips, and service parts, browse dispensers, mixers, and nozzles. Current manufacturer background is available from Techcon.

Need Help?

Need help matching back plate hardware to the right cartridge holder size? Call (800) 220-1966 or email [email protected].