Techcon TS6500 Back Plate

Description

This Techcon TS6500 back plate is replacement frame hardware for the Techkit Mixer platform. It is one of the dispenser parts used when a mixer frame needs its support plate replaced after damage, wear, or teardown. The plate helps keep cartridge-holder hardware square to the machine so a two-component kit can seat cleanly before the mixing cycle starts.

Where These Dispenser Parts Fit

The TS6500 mixer uses matched cartridge holders, plungers, retaining collars, and covers to handle 2.5 oz, 6 oz, 8 oz, 20 oz, and 1/10 gallon Techkit configurations. The back plate sits in the non-wetted hardware side of that system. It supports the mixer hardware that positions the cartridge before fluid reaches the disposable mixer or outlet assembly.

Shops that run epoxies, silicones, potting materials, and other two-component fluids through a TS6500 depend on repeatable alignment. If a support plate is bent or loose, the cartridge holder can shift during setup, which makes the plunger and mix rod harder to seat. Replacing the plate restores a firm mounting point before operators troubleshoot more expensive drive or plunger components.

How the Back Plate Helps the Mixer Hold Alignment

A back plate does quiet work, but it matters in a machine that repeats the same stroke cycle many times per shift. It gives the hardware a stable surface, helps distribute fastener load, and reduces movement at the fixture points. Maintenance teams usually inspect this part during a larger TS6500 service because damage here can show up as uneven cartridge seating, noisy movement, or a setup that feels different from one kit size to the next.

Keep this part grouped with the rest of the TS6500 hardware rather than general bench supplies. It belongs to the Techkit mixer, not to hand-held cartridge retainers or syringe-barrel dispensing stations. That distinction helps a production floor avoid grabbing a part that looks like generic bracket hardware but is sized for a specific mixer assembly. During service, check adjacent fasteners and mounting surfaces at the same time so the repaired frame stays square after the plate is replaced.

Dispenser Parts Specs

Order this plate when the TS6500 frame hardware needs repair rather than a full mixer replacement. Browse our dispensing and mixing accessories for related holders, collars, and plunger hardware. The Techcon line covers the TS6500 platform and related two-component dispensing equipment.

Need Help?

Need help identifying the right TS6500 frame component before service? Call (800) 220-1966 or email [email protected].