Description
Banshee Diamond Blade is a segmented stone-cutting blade for straight and miter cuts in granite, marble, quartz, and engineered stone. The solid-core design combines 38 high segments with a 4 mm cutting width to support stable, smooth cutting on compatible saw equipment. It is offered in 14 inch and 16 inch configurations for fabrication shops working across common slab materials.
Banshee Diamond Blade Configurations
The 14 inch version is paired with a suggested speed of 2,300 RPM, while the 16 inch version is paired with a suggested speed of 2,000 RPM. Both configurations use 38 segments with a 30 mm segment height. A 60 mm arbor and 50 mm adapter arrangement supports the listed fitment options. Confirm the spindle, flange, guard capacity, horsepower, rotation direction, and maximum permitted speed before installation.
A published feed-rate range of 100 to 120 inches gives fabricators a starting point, but final settings depend on stone type, slab thickness, water delivery, machine condition, cut geometry, and finish requirements. Miter work may need a more conservative setup than a straight production cut. Begin with a controlled test and adjust feed only after checking edge quality, motor load, vibration, and segment behavior.
Setup and Cutting Practice
Inspect the blade for cracks, missing segments, shipping damage, and arbor wear before mounting. Clean the spindle and flanges, seat the blade squarely, and tighten hardware to the machine specification. Verify that the rotation arrow matches spindle direction and that the guard is installed. Use the water flow and operating procedure required by the saw.
Keep the work supported and avoid forcing the blade through the slab. A rising motor load, wandering cut, unusual noise, heat, or vibration indicates that the setup needs attention. Stop the machine before inspection. Follow equipment instructions and site controls for guarding, dust, water, and protective equipment.
Specifications
| Property | Detail |
|---|---|
| SKU | BAN-BANSHEE |
| Product type | Segmented diamond blade |
| Available diameters | 14 inch and 16 inch |
| Segments | 38 |
| Segment height | 30 mm |
| Blade thickness | 4 mm |
| Arbor | 60 mm with 50 mm adapter |
| Materials | Granite, marble, quartz, and engineered stone |
Browse related abrasives and cutting supplies. Review the OSHA requirements for abrasive wheel machinery with the saw instructions.
Need Help?
Need help checking blade diameter, arbor fit, or material compatibility? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.