Description
Techcon TSD1021-3 is a male elbow barb and dispenser parts item used when a service line needs a compact 90 degree hose connection into a 1/4 NPT port. The elbow format helps route tubing close to the equipment body, keeping the line out of the operator’s way while preserving a cleaner path between air, fluid, or accessory connection points.
Where dispenser parts like elbow barbs fit
Barbed fittings are common around dispensing equipment because they give flexible tubing a direct mechanical grip without building a stack of extra adapters. A male elbow barb is useful where the tube would otherwise bend sharply after leaving a threaded port. Reducing that bend helps protect flow, lowers strain on the tubing, and makes the setup easier to service when a line needs replacement.
Use this part when the work order, removed fitting, or machine setup calls for TSD1021-3. The source product row identifies the part as a 1/8 by 1/4 NPT male elbow barb. It is connection hardware, not a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle. Keep those cartridge consumables in a separate bin so technicians do not confuse fluid-path outlets with hose and fitting repairs.
Checking dispenser parts during replacement
Before installing the elbow, relieve pressure and confirm the tubing is compatible with a barbed connection. Cut the tube end squarely, inspect the port threads, and remove cured material or debris that could keep the fitting from seating. Push the tubing fully onto the barb, then test the line at low pressure before returning the station to normal use. If the tube slips, hardens, or cracks, replace the tubing at the same time rather than relying on a fresh fitting alone.
| SKU | TECTSD1021-3 |
|---|---|
| Part Type | Male elbow barb |
| Tube Connection | 1/8 inch barb reference |
| Thread Connection | 1/4 NPT male |
| Use | Flexible tubing connection for compatible dispensing setups |
| Unit | Each |
Keep elbow barbs near straight fittings, tubing, receiver-head parts, and spare seals so a repair bench can rebuild the connection path quickly. Browse related dispensers, mixers, and nozzles. For manufacturer background on Techcon dispensing systems, visit Techcon.
Need Help?
Need help confirming whether this elbow barb matches your tubing, port, or dispensing station? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.