Techcon TS120CP-250 Cartridge Assembly with Plunger, 12 oz

Description

The Techcon TS120CP-250 is a 12 oz natural HDPE cartridge that serves as the syringe barrel of an air-powered dispensing gun, with a wiper plunger already seated inside. The plunger’s leading edge wipes the cartridge wall clean as it travels, so material transfers to the outlet instead of clinging to the sidewall. A 1/4 in NPT threaded nozzle port accepts standard dispensing tips and mixers.

Where This Syringe Barrel Fits

Bench and production lines running two-part epoxies, silicones, and general-purpose adhesives load this cartridge into a hand-held or bench-mounted pneumatic gun as the working reservoir. The 12 oz capacity matches common single-component and static-mix dispensing setups without stepping up to a bulk cartridge system, and the natural HDPE wall lets an operator see fill level at a glance.

How the Syringe Barrel Performs Under Pressure

Rated to a maximum operating pressure of 100 psi (6.9 bar), the cartridge holds up through repeated pneumatic cycles without deforming at the threaded nozzle end. The wiper plunger keeps the fill line consistent shot to shot, which matters when a static mixer downstream depends on steady back-pressure. Cartridges arrive capped and ready to load, with no additional prep before the first cycle. Storing a case near the dispensing station keeps a fresh cartridge within reach whenever the active one runs dry mid-run, which limits downtime on lines running back-to-back bonding cycles.

TS120CP-250 Specs

Order the TS120CP-250 case when your line runs 12 oz cartridge dispensing on a recurring basis. Browse our dispensers, mixers, and nozzles for matching static mixers and tips. For gun compatibility and pressure ratings, see Techcon.

Need Help?

Need help matching this cartridge to your dispensing gun or mixer size? Call (800) 220-1966 or email [email protected].