Techcon 101 Series Cartridge Adapter, 20 oz

Description

This adapter lets a Techcon G Series 20 oz cartridge retainer accept a standard 10 oz cartridge cap, one of the small dispensing valve parts that keeps a single gun working across two cartridge sizes. Without it, a 10 oz cap will not seat correctly in a 20 oz retainer, and the gun cannot build the seal it needs to push fluid through the cartridge.

Where These Dispensing Valve Parts Get Used

Shops that stock both 10 oz and 20 oz cartridges for the same 2-part adhesive or sealant use this adapter to run either size through one 101-20R retainer body, rather than buying and storing a second dedicated gun. It threads between the cap and the retainer opening, and the assembly then accepts the standard 918-000-036-C cap and hose to complete the pneumatic path to the gun.

Fit and Handling for These Dispensing Valve Parts

Hand-tighten the adapter into the retainer before loading the cartridge, and check the seal each time a cartridge is swapped, since a loose adapter is the most common cause of air leaking around the cap rather than driving the piston. The metal construction holds up to repeated cartridge changes far longer than the cartridge packaging itself.

Specifications

• Converts: 10 oz cartridge cap to fit a 20 oz G Series retainer
• Used with: Techcon 101-20R retainer and 918-000-036-C cap assembly
• Rated pressure: up to 100 psi (6.9 bar), matching the G Series retainer
• Material: metal

Order this adapter alongside the matching retainer and cap if building a new 20 oz dispensing station, or as a standalone spare if only the adapter has worn. Browse Chemical Concepts dispensing valves, mixers, and nozzles for the full 101 Series lineup, or see the complete Techcon cartridge dispensing system.

Need Help?

Need help matching cartridge size to the right retainer and adapter combination? Call (800) 220-1966 or email [email protected].